2026, №40 | 
2025, №38 | 
2025, №39 | 
2024, №36 | 
2024, №37 | 
2023, №34 | 
2023, №35 | 
2022, №32 | 
2022, №33 | 
2021, №30 | 
2021, №31 | 
2020, №29 | 
2019, №27 | 
2019, №28 | 
2018, №25 |
2018, №26 | 
2017, №24 | 
2016, №23 | 
2015, №22 | 
2014, №20 | 
2014, №21 | 
2013, №18 | 
2013, №19 | 
2012, №17 | 
2011, №16 | 
2010, №15 | 
2009, №14 | 
2008, №13 | 
2007, №12 | 
2006, №11 | 
2005, №10 | 
2004, №9 | 
2003, №8 | 
2002, №7 | 
2001, №6 | 
2000, №5 | 
1999, №4 | 
1998, №3 | 
1997, №2 | 
1994, №1 |
| ←| Scientific and Technical Bulletin of the Institute of Oilseed Crops NAAS (ISSN: 2078-7316) / 2015 / 22 / P. 150-158 | Results of the experimental studies of the facility for pellet production from the protein fraction of oilseed cake |
 | | Aliev E.B., Patsula A.N. |
Increased production and improved quality of protein feeds, being one of the most important tasks in increasing the productivity of animals and birds, can be achieved by improving meal processing technology, which is currently limited to grinding followed by addition to the feed.
Advanced Institute oilseed cake processing technology through the introduction of additional mechanical operations fractionation crushed cake and husk the protein fractions can provide more than 40% protein powder protein content of at least 38%.
To increase the travel time of the oxidation process proposed to produce a protein fraction in the form of pellets
Purpose is increased efficiency in the process of formation of feed pellets from the protein fraction obtained by mechanical fractionation cake with crushed oilseeds by study structural and technological parameters and modes of installation for the production of pellets.
To study the process of manufacturing pellets from pomace oil seeds developed constructive-technological scheme and an experimental plant for its implementation. Installation for the production of pellets consists of frame, motor, pulleys, bearing assembly, screw, cylindrical body, hopper, and five forming cams, cylindrical matrices knife.
Installation for the production of pellets is joined by a drive shaft to the gear motor maximum power - 7.5 kW. For the experiment turns on the electric motor and gearbox using frequency converter Danfoss VLT Micro Drive set required speed shaft drive installations for the production of pellets.
The protein fraction weighing 10 kg is loaded into the bunker and using calibrated regulating valve set given material feed rate to the plant for the production of pellets.
The beginning of the production cycle was considered the process of loading the source material. The end of the production cycle - to complete the process of accumulation of pellets.
As an elected oilseed sunflower.
Factors Research is the frequency speed drive shaft, feed rate of protein fractions and its humidity.
Experiments conducted in the triple repetition.
For criteria selected research productivity of the manufacturing process creating pellets Q, bulk density ? and pellets motor power P, spent on the process.
Experimental studies process producing pellets from oilseed meal set depending performance, power plants and the bulk density of the obtained pellet feed speed, frequency of rotation of the working organ, humidity protein fraction. Optimal structural and technological parameters of facility for production of pellets feed material is q = 35,7 kg / hr, the revolutions of the working body, n = 50,5 / min, moisture protein fraction W = 28,9%. With optimal data values of parameters of electric power plants for production of pellets totaled P = 973 W, and its performance Q = 48 kg / h. |
Citation: Aliev, E., & Patsula, A. (2015). Results of the experimental studies of the facility for pellet production from the protein fraction of oilseed cake. Scientific and Technical Bulletin of the Institute of Oilseed Crops NAAS, 22, 150-158. |
References | |
|
|
UA
ENG